Drill template - 1590B
Please check positioning before drilling - those holes are your
responsibility and these templates are just a guide.
The best way to mark holes for the pots is to lay the PCB on the box
before you start soldering anything and mark at the centre pad of each.
The DC socket needs to be quite close to the edge of the box so it
comfortably clears the pots.
Recommended drill sizes:
Footswitch, DC 12mm
Jack sockets 9.5-10mm
Pots 7mm (8mm if you’re using the board-mount toggle)
Mini-toggle 5mm
Vertical distance from centre of pots to centre of toggle switch is 19mm.
