FUZRR FR2060, Руководство пользователя, Страница: 9 / 10

- 8 -
(2)
．
Use any clamp to clamp the wire along the line being repaired. If the clamp point L1, L2
or L3 is not lit, the line is at the line break. Shorten the position of the clamp point, and
accurately find the line break position (breakpoint position), which is very convenient and safe
for line inspection.
。
Note: This function is very suitable for the open circuit fault in the
maintenance line, safe and fast. ！
VI. Battery Replacement
Please pay attention to battery polarity
！
1. Before replacing the battery, the clamp must be removed from
the wire to be inspected. Do not replace the battery during the test.
2. Press the
“
ON OFF
”
button to shut down.
3. Loosen the instrument battery back cover.
4. Replace with a new qualified battery, please pay attention to the
battery polarity and specifications (9V 6F22 model).
5. Close the battery back cover.
6. Press the
“
ON OFF
”
button to check if the instrument can be turned on normally. If it
cannot be turned on, please check if the battery level is enough or follow step 3 to
re-operate.
VII.Accessories
Instrument 1PC
Instrument bag 1PC
Detector battery
9V Alkaline battery 1PC
Manual, certificate 1SET