4
MAINTENANCE TIPS
It is the responsibility of the owner or guardian to periodically
inspect the wheels, nuts, T-bar, tightness of T-bar and
bearings for wear and tear, and check for proper tightness.
Always make sure to tighten all bolts and nuts before you
ride. Eventually wheels, self-locking nuts and bearings wear
and need replacement. The lives of these components
depend on the kind of riding done. Lots of braking will
wear out wheels, and riding in dirty or wet conditions will
prematurely shorten bearing and fasteners life. Worn wheels
and bearings are considered normal wear-and-tear and are
not covered by the Nextsport Limited Warranty. Wheels other
than genuine Fuzion wheels may not be compatible with your
scooter. Always use genuine Fuzion replacement parts.
CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust. Do not
use industrial cleaners or solvents as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-
based cleaners as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
CHANGING THE BATTERY
owner’s manual
BRAKE USE
Make sure that you have a
fi rm grip on the handlebars
and are traveling in a
straight line. Slide one foot
toward the back of the
scooter.
With the heel of that foot,
GRADUALLY apply pressure
to the top of the brake
mechanism. This will decrease
your speed and eventually
bring you to a stop.
WARNING: BRAKE
MECHANISM WILL
GET HOT FROM
CONTINUOUS USE.
DO NOT TOUCH
AFTER BRAKING.
1
2
To replace the battery carefully remove the battery
compartment cover using a screw driver and replace the
battery with a new one ensuring that it is inserted correctly.
Secure the cover by replacing and tightening the screw.