![FUXTEC FX-RTP350 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/fuxtec/fx-rtp350/fx-rtp350_original-manual_2352500017.webp)
Original Bedienungsanleitung
FUXTEC FX-RTP350 / FX-TP1250 / FX-TP1350 / FX-TP1750 / FX-TP11100 (INOX)_de_en_fr_ita_rev09
17
TROUBLESHOOTING
Trouble
Pls check
Should do
The engine does not start
and does not make noise.
Is the pump plugged?
Does the pump starts when
fully submerged?
Check your electrical installation
Check that the float can move freely
Pump does not deliver.
Does the impeller rotates?
Is it in good condition?
Is the pump inlet free?
The delivery head requested
exceeds the requirements of
the pump or the discharge
pipe is too narrow
Eliminate the reason for blocking
Replace the impeller
Clean the pump inlet
Use the pump in accordance with
its technical capabilities
Increase the pipe diameter
The pump stops suddenly
Is there a sufficient water
level to suck?
Did the pump run for a
long time without
stopping?
Are you sure that the pump
inlet is not obstructed?
Do the power of the mains
match the rating plate?
Is the temperature of the
liquid less than 35°C?
Disconnect the pump from the
mains and let it cool for a few tens
of minutes
Clean the pump inlet
Use a power supply matching the
rating plate
Observe the maximum allowable
temperature
Flow decreases
Is the pump inlet clean?
Is the impeller clean?
The discharge pipe is not
partially clogged?
Clean the area or areas in question
(s)
Low flow or insufficient
Are you sure that the pump
inlet is not obstructed?
Is the impeller clean?
Are you sure that the outlet
pipe is not obstructed?
Is the diameter of the
discharge pipe enough?
Clean the zone (s) concerned and
verify check valve, if applicable
Connecting a pipe with a suitable
diameter and suppress reduction of
the water passage