FUXTEC FX-E1WS20 Скачать руководство пользователя страница 4

Original User Manual FUXTEC 20V cordless angle grinder FX-E1WS20 

 

 

 
- If you use a power tool outdoors, only use extension cords that are suitable for outdoor use. Using 
an extension cord suitable for outdoor use reduces the risk of electric shock. 
 
 

Personal safety 

 
- Be alert, pay attention to what you are doing, and use common sense when working with a power 
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol or medication. 
A moment of carelessness while using a power tool can cause serious injury. 
 
- Wear personal protective equipment and always wear safety glasses. Wearing personal protective 
equipment such as a dust mask, non-slip safety shoes, hard hat or ear protection, depending on the 
after type and use of the power tool, reduces the risk of injury. 
 
- Avoid unintentional start-up. Make sure that the power tool is turned off before connecting it to 
the power supply and/or battery, picking it up or carrying it. If you lift your finger while carrying the 
power tool on the switch or connect the device to the power supply when switched on, this can lead 
to accidents. 
 
- Remove adjustment tools or wrenches before turning on the power tool. A tool or wrench that is in 
a rotating part of the unit may cause injury. 
 
- Avoid abnormal posture. Maintain a safe standing position and balance at all times.  This allows you 
to control the power tool better in unexpected situations. 
 
- Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away 
from moving parts. Loose clothing, jewellery or long hair can be caught by moving parts. 
 
 

Use and handling of the power tool 

 
- Do not overload the device. Be sure to use the designated power tool for your work. With the right 
power tool, you will work better and safer in the specified power range. 
 
- Do not use a power tool whose switch is defective. A power tool that cannot be switched on or off 
is dangerous and must be repaired. 
 
- Unplug the power cord and/or remove the battery before making adjustments to the device, 
changing accessories or putting the device away. This precaution prevents the power tool from 
starting accidentally. 
 
- Keep unused power tools out of the reach of children. Do not have the device used by persons who 
are not familiar with it or have not read these instructions. Power tools are dangerous if they are 
used by inexperienced persons. 
 
- Take care of power tools properly. Check that moving parts function properly and do not jam, that 
parts are not broken or damaged in such a way that the function of the power tool is impaired. Have 

Содержание FX-E1WS20















Отзывы: