Original user manual FUXTEC 20V Cordless Pole Hedge Trimmer FX-E1HH20
4
Electrical Safety
- The plug of the power tool must fit into the socket. The cap must not be changed in any way. Do
not use adapter plugs together with grounded power tools. Unchanged plugs and suitable sockets
reduce
the risk of electric shock.
- Avoid physical contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
- Keep power tools away from rain or moisture. The penetration of water into a power tool increases
the risk of electric shock.
- Do not use the cable to carry or hang up the power tool or to pull the plug from the socket. Keep
the cord away from heat, oil, sharp edges, or moving parts. Damaged or tangled cables increase the
risk of electric shock.
- If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The
use of an extension cable
ideal for outdoor use reduces the risk of electric shock.
- If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The
use of an extension cable
ideal for outdoor use reduces the risk of electric shock.
Safety of Persons
- Be alert, pay attention to what you are doing, and use common sense when working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while utilizing the power tool can cause serious injury.
- Wear personal protective equipment and always protective goggles. Wearing personal protective
equipment, such as dust mask, non-slip safety shoes, safety helmet or hearing protection,
depending on the type and use of the power tool reduces the risk of injury.
- Avoid unintentional commissioning. Make sure that the power tool is switched off before
connecting it to the power supply and/or battery, picking it up or carrying it. If you have your finger
on the switch when carrying the power tool
or if you connect the device to the power supply while it is switched on, this can lead to accidents.
- Remove adjustment tools or wrenches before turning on the power tool. A tool or key that is in a
rotating part of the device
can cause injury.
- Avoid an abnormal posture. Make sure you have a secure
Stand up and keep your balance at all times. This allows you to better control the power tool in
unexpected situations.