FUXTEC FX-4MS131, Оригинальное руководство пользователя

Страница: 23 / 29

Original User Manual FX-4MS131_rev03
23
Oil change
It is also recommended to replace the oil if it runs hot and loses
its lubricating properties.
1 After filling, check that the oil cover is well closed.
2 When changing the oil, unscrew the oil cover and tilt the engine towards the oil filler neck
to collect the oil in a suitable container for used oil.
3 Fill-in sufficient new 4-stroke oil.
4 Screw the oil cover back in.
In case of spillage, please wipe off the overflowing oil and do not forget
to wash your hands well with soap.
WARNING
Please contact your local community for the disposal of the used oil. Please do not dispose
of used oil in the sewage system or the open environment.
Maintenance
Air Filter
The function of the air filter is to clean impurities like dust from the air and to prevent
these dust particles from entering the combustion chamber and the carburettor.
To avoid any damage to the carburettor, carry out regular maintenance of the air filter.
The maintenance intervals must be increased when working in a dusty environment.
WARNING
Please do not use alcohol or highly flammable agents to clean the air filter,
as this could lead to a fire or even an explosion
It is strictly forbidden to operate the engine without an air filter, as this would
cause damage to the engine.
1 Turn the screw counterclockwise to remove the filter cover
2 Use non-flammable solvents or cleaning agents with a high
flashpoint to clean the filter element and let it dry completely.
3 Immerse the filter element in fresh lubricating oil and then press out the oil.
4 Put the filter element in the correct position again.