Original User Manual FUXTEC Petrol Leaf vacuum cleaner / blower FX-LBS126P_rev09
12
9. Assembly as leaf blower
Caution:
Always switch off the engine when carrying out assembly and/or maintenance work!
Wear protective gloves during assembly to protect yourself from cuts.
Mount the two blowpipes into each other and position them on the main device. Make sure that
they are screwed on all the way and fix them with screw A. Using the blowing attachments:
10.
Assembly as leaf vacuum
1.
Insert the conical suction pipe 15A through the large opening of the leaf bag 16B and
push the tapered side of the pipe through the narrow opening 16A (see illustration on
page 14)
2.
Connect the bent suction pipe 15B to the conical nipple 15A as shown in the figure. Bring
the two parts together and turn the bent intake pipe until the hole for the screw matches.
Screw the two parts together.
15A
15B
Rib
Small opening 16A
Large opening 16B
