＿
Measure and mark two bottom mounting
holes on the wall corresponding to the
pre-drilled hole locations in the bottom
mounting bar.
1
Draw horizontal line connecting the two bottom
marked locations.the line should to be level.
adjust to level if necessary.
Use a 1/4 in. (6 mm) drill bit
for drywall anchor installa
tion. Use a 1 /8 in. (3mm)
drill bit for direct stud
installation.
NOTE: If installing into a
material other than drywall
or into stud, consult a pro
fessional for proper instal
lation.
＿
A
A
top slot opening
bottom bracket (C)
bottom slot
A
Installation Guide
＿
Measure and mark two bottom mounting
holes on the wall corresponding to the
pre-drilled hole locations in the bottom
mounting bar.
1
Draw horizontal line connecting the two bottom
marked locations.the line should to be level.
adjust to level if necessary.
Use a 1/4 in. (6 mm) drill bit
for drywall anchor installa
tion. Use a 1 /8 in. (3mm)
drill bit for direct stud
installation.
NOTE: If installing into a
material other than drywall
or into stud, consult a pro
fessional for proper instal
lation.
＿
A
A
top slot opening
bottom bracket (C)
bottom slot
A
