Disassemble the cabinet door(s)
After taking out the cabinet, disassembling the
door(s).
The door(s) can be quickly removed by pushing the
button on hinge.
Unclipping the door from the mounting plate.
02
IMPORTANT:
.
01
WalI Mount Installation
Installing the mounting brackets and mounting the
Cabinet Body on wall
J
bottom slot
I
I
Measure and mark the bottom mounting holes on the wall
corresponding to the pre-drilled hole locations in the bottom
mounting bracket (Draw horizontal line connecting the two
bottom marked locations. The line should to be level.
Adjust to level if necessary). Install the screws (C) to fix
the bottom bracket according to the remarks below.
Put the cabinet body on the bottom bracket and ensure the
bracket has been inserted into the slot.
Insert the top brackets into the top slot and move them to
correct location.
Mark the holes on the wall corresponding
the pre-drilled hole locations for top mounting brackets.
Install the screws (C) to fix the top brackets according to the
remarks below.
- Plaster: remove the screws from the white plaster wall plugs
(D). Using a Phillips head screwdriver in the end of the
Plaster plug, gently apply pressure and rotate clockwise.
The plug will bore its own hole into the Drywall.
Continue until the end of the plug is close to flush with
the wall. WARNING: DO NOT OVER-TIGHTEN.
- Masonry: Drill holes using a 6mm masonry drill bit. With a
hammer, gently tap each Green anchor (E) into the holes
until flush with the wall surface.
- Timber: Drill holes using a 3mm wood drill bit. Anchors are
not necessary.
When determining the height of product,
verify that the doors will clear all obstacles
(such as a faucet or light fixture). A minimum distance
of 3” (76mm) is required.
top slot opening
J
