Last updated:
31
/
10
/201
8
Page
6
of
12
MOONLANDER 2
USB Stick Miner User Guide
6
>
If everything is setup and running correctly you should see something
similar to this:
If you are new to mining, the most important stats on this screen are what is in
between the dashed lines. These are your per device statistics, so if we follow
along from left to right for MLD 0, the first number (3.27 mh/s) is your 2 minute
average hashrate, second number is your overall average hashrate since miner
start (3.30 mh/s), and the last number (3.19) is the pool hashrate based on your
submitted shares. A:25 shows your number of shares accepted by the pool, R:
0 shows number of shares rejected (usually due to a stale share), and last
number HW:0 shows the number of hardware errors reported by the ASIC. This
is probably the most important value and will be explained in more detail in the
tuning section below.
Keep in mind that the first two numbers is the actual hashrate the device is
hashing at (it uses the low level nonce counters to keep track of hashrate and
is very accurate), so this number will always be higher than your pool hashrate,
because it does not take account of inefficiencies of lost shares due to stale
network shares or hardware errors. So your pool hashrate is your net effective
rate the device is hashing at.
