2.Install the chip first before installation servo
3
.Stick the chip of servo by glue
6.Install the undercarriage
4. Install the rudder and elevator servo
5.Put the connect line of servo into
the fuselage
3
1. Remove the battery before storing the model to prevent the risk of explosion or combustion.
2. Do not put objects on the model - hang it up if possible.
1. Remove the battery before storing the model to prevent the risk of explosion or combustion.
2. Do not put objects on the model - hang it up if possible.
1. Remove the battery before storing the model to prevent the risk of explosion or combustion.
2. Do not put objects on the model - hang it up if possible.
Note: Due to the continuous updating of the product, there may be small errors between the manual and the actual product.
1. The battery must be removed during storage, otherwise it may explode and burn
2. After the flight, please do not squeeze the model when storing. It is better to hang it up
1. Connect servo extension leads to the
elevator and rudder servo cables.
