51837570_V_1_0.DOC
51/104
• Press
[MODE/ENTER]
to enter the main menu (display flashing).
• Press
[UP]
or
[DN]
to select
“TIME”
.
- Fixture running time
With this function you can display the running time of the device.
• Select
“MATI”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“XXXX”
, “X“ stands for the number of hours.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Lamp running time
With this function you can display the running time of the lamp.
• Select
“LATI”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“XXXX”
, “X“ stands for the number of hours.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Clear lamp time
• With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
• Select
“CLLT”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
or
[DN]
to select
“ON”
if you wish to enable this function or
“OFF”
if you don’t.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Main menu 5
• Press
[MODE/ENTER]
to enter the main menu (display flashing).
• Press
[UP]
to select
“EDIT”
.
- Define the number of steps in Run
With this function you can define the number of steps in the
Program Run.
• Select
“STEP”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“S-XX”
, “X” stands
for the total amount of steps you want to save, so you can call
up to 48 scenes in
“RUN”
. For example if the “XX” is 05, it
means that
“RUN”
will run the first 5 scenes you saved in
“EDIT”
.
• Press
[MODE/ENTER]
to save and exit.
- Auto scenes rec
With this function you can automatically record new scenes.
• Select
“REC”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“RE-XX”
, “X” stands
for the total amount of memorizable scenes, you can call up in
“RUN”
. For example if the “XX” is 05, it means that
“RUN”
will
run the first 5 scenes you saved in
“EDIT”
.
• Press
[MODE/ENTER]
to save and exit.
- Editing the channels of the individual scenes
With this function you can edit the program to be called up in
Run.
a) Editing via the Control Board
• Select
“SC01”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“SCXX”
, “X” stands
for the scene no. to be edited.
• Change the scene no. by pressing
[UP]
or
[DN]
.
