FUTURE KIT FK1108, Руководство пользователя

Страница: 2 / 3

(2) ROBOT BODY
Assembling Steps of the Body set.
http://www.futurekit.com
HIGH QUALITY ELECTRONIC KIT SET FOR HOBBY & EDUCATION
1
2
Mini Caster
Flat head nut
2.5x10 and NUT M2.5
Screw 2x1/4
Install battery holder to body robot with flat head nut 2.5x10 and nut M2.5.
Take off the both screw of motor gear and then mount the motor lock.
Secure with the both screw of motor gear.
Install the wheels onto the shaft
of the gear motors and secure them
with the remaining two #4 x 1/4"
pointy screws.
Screw 4x1/4
Screw 4x1/4
Install the control board into body robot.
Insert the electric wire
battery holder into
body robot.
Solder electric wire at motor pole with
red wire solders at left hand side and
black wire solders at right hand side.
3
Mount motors, each with
two #4 x 1/4" screws
4
Solder motor wire to BR002-1 PC-
board. Red wire is positive pole and
black wire is negative pole. Character
"L" is left motor gear and "R" is right
motor gear.
5
6
Mount BR002-1 PC-board into
body robot and secure them
with two #2 x 1/4" screws.
Solder battery holder wire to
BR002-1 PC-board at B1 and B2.
Red wire is positive pole and Black
is negative pole.
7
8
9
10
11
12
Body robot is completely installed.
BLACK
RED
NOTE: This robot has to playing at low light place for protect error working of sensor.
The robot is prompt working and playing.
Fix a mini caster wheel set to
the Body set with using a 12 mm. bolt as a holder.