4
w w w. d a d o q u a r t z b at h w a re . co m
installation guide
built-in bathtub
Installation
Before Installation
- We recommend that the installation be done by a minimum of 2 people as a safety
precaution. Also make sure to adopt the proper posture when lifting the bath or basin.
- Adhere to all local building and plumbing codes.
- The diagrams in this guide are not construction plans. They are visual aids.
- For best results, the floor must be level and the wall must be square with the floor.
Installation Requirements
Please read the instructions carefully and follow the specified guidelines so as to avoid any
damage to the fixture.
1. The owner/user of the product must keep this information for future reference.
2. Consult local building codes to make sure the installation complies with standards.
3. Remove the unit from its packaging. Before disposing of it, inspect the unit to make
sure it is in good shape. Should inspection reveal any damage or defect in the finish,
contact your distributor. The warranty does not cover damages or defects in the finish
once it has been installed. The Manufacturer’s responsibility for shipping damages
ceases upon delivery of the product in good order to the carrier. All complaints
regarding damage due to transport must be made.
4. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
5. To protect the unit during installation, we recommend that you lay a piece of cardboard
on the bottom.
6. If the unit is covered with polyethylene protective film, do not remove until installation
is complete to grant maximum protection. However, remove the film where any two
surfaces will be in permanent contact.
7. Verify that all dimensions on the plan are the same as the ones of the unit.
Installation Notes
IMPORANT:
Install this product according to the installation guide. Spout must provide
a minimum of 60mm reach for adequate clearance into bath. Our products must be
installed by certified professional only and according to our installation guide as well as
federal, provincial/state and local building codes and regulations.
Technical Assistance
If further assistance is required please contact your local distributor.
