F
F
Enclosure
Either or both
cable tracks can
be used.
Trim Panel
Fixing holes
Mount bracket
Down Switch
Up Switch
Fixing holes
SECTION F-F
Mount
bracket
fixings
INSTALL INSTRUCTIONS
Check that the cabinet, enclosure, lid and the trim panel
•
are made to the details shown on the previous pages.
You can stand the mechanism up on its base to test it
•
before putting in the cabinet. See control document for
details. Use the IR remote with caution and always cover
the STOP button in case of issues.
Centrally fix the mechanism to the back of the cabinet in
•
the places shown.
Run up and down and then add the enclosure.
•
Adjust the position of the enclosure and adjust the up
•
and down switches with caution. Temporarily add lid to
check height.
Run screen cables up into enclosure. Secure cables as
•
they enter and leave the cable tracks with cable ties.
Make sure no cables can get tangled or caught as the
mechanism moves.
Add trim panel. And adjust. This trim panel moves up
•
into position as the TV lifts. Observe this movement and
understand it before fixing.
The uprights can be adjusted in height. Use the fixings
•
on each side through the slots. Put as many fixings back
in when finished as these also secure the linear guides.
Loosely put the bolts in the back of the screen and then
hook it on to the mount plates on the mechanism.
Check movement with screen with caution.
•
WWW
.
FUTUREAUTOMATION
.
NET
TSLM-MO-2
TECHNICAL SHEET
ISSUE 002
SHEET 6
MARINE OUTDOOR TELESCOPIC SCREEN LIFT
UK
+44 (0) 1438 833577
US
+1 (603) 742 9181
