36
Barcode:
EXAMPLE OF BAR CODE.
THIS WILL BE COMPARED WITH SCANNED LABEL
NOTE
EXTENSION OF FILE SHOULD BE .LBL
START AND END WITH #
NAME CAN BE OF MAXIMUM 32 CHARACTERS
#
SAMPLE BAR LABEL
#
Harness Name:
EXAMPLE OF HARNESS NAME.
NOTE
EXTENSION OF FILE SHOULD BE .LBL
START AND END WITH #
NAME CAN BE OF MAXIMUM 16 CHARACTERS
#
SAMPLENAME
#
General points to remember for PC connectivity:
•
For DOS based execution, files required on the drive are trans1_1.exe,
receive.exe, transmit. at. Copy all these files from the floppy ro CD provided to the PC.
•
Data to be entered should be in non-document ASCII text mode using any editor
/ word processor.
•
Start the data entry by a “#” character and end also by a “#” character. Any
matter before and after # will be considered as comments and can be used to write details of
harness.
•
Always use correct COM serial port. By default serial port chosen is COM2. If
it is to be changed then open file transmit. At in an editor and last line which stands for com
port, 0 for COM1 and 1 for COM2. Change as per requirement and save in text mode only.
Do not modify any other data as these are the settings for serial communication.
•
Always put the receiving item in receive mode first and then press “ENTER” to
transmit data.
•
Connect the cable correctly as marked on cable.
Harness Data:
•
Harness Data files should have extension “FILENAME.HRN”.
