6
Measuring
1. Insert 1x 9V battery into the device. Consider the polarity. This is indicated in the
device.
2. Hold the meter at the handle and point it to the surface to be measured.
3. Pull and hold the trigger to start testing. When the battery is good, the display
lights up. (Replace the battery if the display does not light up)
4. While the device is measuring, the SCAN symbol appears at the top of the display.
5. While the trigger stays intact:
∙
THE LASER BEAM
Press the Laser key to activate the laser beam. The laser symbol appears on
the display. Keep the laser beam about 1 to 1.5cm above the surface to be
measured.
∙
TEMPERATURE UNIT
Select the temperature unit with the °C / °F button
∙
DISPLAY LIGHTNING
Use the display light key to turn the display light on or off.
6. When the trigger is released, the last measured value will appear on the display.
The HOLD symbol appears at the top of the display.
7. The thermometer automatically switches itself off after 7 seconds after releasing
the trigger.
