20
Before Using
Handling the RF module
Removing the RF module
1 Remove the RF module cover by slid-
ing it in the arrow direction.
2.Pull the module upward while pushing
the left and right claws to the inside.
Inserting the RD module
1 Insert the module while being careful
that the transmitter side connector
pins are not bent.
2 Push in until the claws lock with a
"click".
3 Install the RF module cover by sliding
it.
- Crystal can be changed without removing the
RF module.
- See page for the crystals that can be used.
RF module temperature rise
When the transmitter is in use, the RF module temperature will rise slightly. This is
normal.
Handling the data pack
With the 3PK transmitter, the setup data of 10 models can be stored in the transmitter
itself and the setup data of 10- models can be stored in a DP-16 removable data pack
(Option).
DP-16K data
pack (Option)
RF module cover
Data pack insertion hole
- Hold the dust cap and insert the data
pack in all the way.
