1M23N12738
&XUUHQWFRQVXPSWLRQ
This servo is designed to be used with models which require especially high
WRUTXHDQGKLJKVSHHG)RUWKLVUHDVRQDODUJHFXUUHQWÀRZVGXULQJVHUYRRS
-
eration. Therefore, decide the safe number of uses by paying careful attention
to the remaining battery capacity.
3RZHUVXSSO\
8VH WKH EDWWHU\ DV VSHFL¿FDWLRQ 8VH D EDWWHU\ RU D YROWDJH UHJXODWRU ZLWK DQ
DPSOHPDUJLQDVWKHSRZHUVXSSO\7KHVSHFL¿HGSHUIRUPDQFHFDQQRWEHGLV
-
played with a dry cell battery.
Even if using a receiver with the BATTERY FAIL SAFE function, it may not op-
erate correctly. Therefore always check the battery voltage and charge the bat-
tery quickly.
When using 5 or more servos for large scale models, use a separate power
supply. An S
.BUS Hub with Cable (2-way/remote battery pack use)
sold separately
can be utilized for using a separate power supply i
n the S.BUS system
.
6\VWHPXVH
For full performance, 2.4GHz system is recommended.
3URJUDPPLQJIXQFWLRQ
This servo can be connected to a PC by using the CIU-2 USB Adapter sold
separately and its various operating characteristics can be changed as a pro-
grammable servo by means of dedicated software
6/LQN
.
6/LQN
is down-
loadable from a Futaba WEB site. However, channel setting and other operat-
ing characteristics settings cannot be made with the existing S.BUS PCLink
software. When you use a transmitter with an S.BUS setting function. By con-
necting a servo to the S.BUS setting connector of the transmitter, a program
setup of a servo can be performed on the screen of a transmitter. This servo
does not have stop mode function. Therefore becomes as [ hold ] when the input
signal of a servo stops. Depending on a setup, a servo carries out vibration. If a
servo continues carrying out vibration, it will break, please restore a setup.
6RIWVWDUW
,QRUGHUWRSURWHFWWKHOLQNDJHRQO\WKH¿UVWRSHUDWLRQZKHQWKHSRZHULVWXUQHG
RQPRYHVWKHVHUYRWRWKHVSHFL¿HGSRVLWLRQVORZO\:KHQDQHZFRQWUROVLJQDO
enters while the soft start is operating, it become normal operation at once.
>6HUYR0RXQWLQJ3UHFDXWLRQV@

WARNING
7XUQRQWKHSRZHULQWUDQVPLWWHUńUHFHLYHURUGHU,QDGGLWLRQ
DOZD\VFKHFNWKHRSHUDWLRQRIDOOWKHVHUYRVEHIRUHÁLJKW
'RQRWLQVHUWRUUHPRYHWKHVHUYRFRQQHFWRUZKLOHWKHUHFHLYHU
SRZHULV21
Since the S.BUS2 servo switches the operation mode au-
tomatically according to the type of signal (S.BUS signal/PWM signal) from the
receiver, if the connector is inserted or removed while the power is ON, an S.BUS
connected servo will be erroneously recognized and may stop.
'RQRWOHDYHWKHVHUYRLQWKHORFNHGVWDWH
Leaving the servo in
the locked state (state in which enough force is applied that the servo cannot
PRYHPD\FDXVHVPRNH¿UHDQGGDPDJH
1HYHU FRQQHFW WKH EDWWHU\ LQ UHYHUVH
Reverse connection may
FDXVHVPRNH¿UHDQGGDPDJH
'RQRWH[SRVHWKHVHUYRWRGXVWDQGZDWHU
The servo does not
have a waterproof construction. If it gets wet, the servo may not operate or the
power supply may short circuit.
)RUWKHVHUYRZKLFKKDVDPLGGOHFDVHRIDQDOXPLQXPKHDW
VLQNFRQVWUXFWLRQ,QVWDOOWKHVHUYRVRWKDWLWGRHVQRWWRXFK
WKHVHUYRFDVHDQGPHWDOSDUWVRIWKHIXVHODJH
It will generate a large
amount of noise if touched. It will become impossible to receive and is extremely
dangerous.
:KHQLQVWDOOLQJWKHVHUYRF52'/,1.$*(WRPDNH
VXUHWKHUHLVQRELQGLQJ
in order to prevent excessive power consump-
tion and decrease the life of the motor and battery.

CAUTION
'RQRWWRXFKWKHVHUYRFDVHLPPHGLDWHO\DIWHUVHUYRRSHUDWLRQ
You may be burned because the motor and circuits inside the servo become
hot.
'RQRWWXUQWKHVHUYRKRUQZLWKXQUHDVRQDEOHIRUFH
The servo
may be damaged.
'RQRWGLVDVVHPEOHRUPRGLI\WKHVHUYR
The servo has a precision
construction. Futaba Corp. will not be responsible for any disassembly or
PRGL¿FDWLRQRWKHUWKDQWKRVHVSHFL¿HGE\XV
'RQRWGURSWKHVHUYRRUH[SRVHLWWRVWURQJVKRFNVRUYLEUD
-
WLRQV
It will damage with a shock.
8VHWKHVHUYRDVDQDFWXDWRULQKREE\DSSOLFDWLRQV
Futaba will
not be responsible if the servo is used in applications other than the above.
)XWDED ZLOOQRWEHUHVSRQVLEOHIRUGDPDJHHWFFDXVHGE\WKHXVHRI
SDUWVRWKHUWKDQ*HQXLQH)XWDEDSDUWV
8VDJH3UHFDXWLRQV
FUTABA CORPORATION
Phone: +81 475 32 6982, Facsimile: +81 475 32 6983 1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba-ken, 299-4395, Japan
©FUTABA CORPORATION 2013, 2 (2)
Use attached dampers and eyelets correctly.
:KDWLV6%86"
Different from conventional radio control systems the
S.BUS
system uses data communication to transmit control signals from
a receiver to a servo, gyro, or other
S.BUS
compatible device. This
data includes commands such as “move the channel 3 servo to
15 degrees, move the channel 5 servo to 30 degrees” to multiple
devices. The
S.BUS
devices execute only those commands for their
own set channel. For this reason, it can be used by connecting
multiple servos to the same signal line.
Many
S.BUS
servos is
in the connected state, one servo of them can be set it up. The
ID
code
of each servo is used for it.
ID code
is indicated on the seal
of the case. After carrying in a model, it is convenient, if you use
attached ID seal and CH seal when ID cannot be seen.
6%86
Using the S.BUS2 port an impressive array of telemetry sensors may
be utilized. This servo is connectable with the both sides of S.BUS and
S.BUS2 port.
>&RQQHFWLRQE\6%866%86V\VWHP@
* Can also be used together with conventional servos.
*
Items required:
S.BUS
or
S.BUS2
receiver,
S.BUS2
servo,
S.BUS
hub,
S.BUS channel setting tool
（・
S.BUS channel setup compatible transmit-
ter /
・
SBC-1 /
・
CIU-2 /
・
S.BUS channel setup compatible receiver
）
>3URFHGXUHIRUXVHZLWKWKH6%866%86V\VWHP@
6HWWKHFKDQQHODWWKH6%86VHUYRV
Set the channel at the
S.BUS2
servos by using an S.BUS channel setting
tool.
* Refer to the
S.BUS
channel setting tool instruction manual for the
S.BUS
servo
channel setting method.
&RQQHFWWKHVHUYRVWRDQ6%86RU6%86FRPSDWLEOHUHFHLYHU
Connect the servos from the
S.BUS
or
S.BUS2
port of the
S.BUS
or
S.BUS2
compatible receiver via
S.BUS
hubs.
>&RQQHFWLRQWRFRQYHQWLRQDOUHFHLYHU@
Ch output/
Battery terminal
Conventional
Receiver
Battery
Conventional
Servo
S.BUS2 servo
S.BUS2 servo
* Operation is the same as that of a conventional servo.
>2SHUDWLRQE\FRQYHQWLRQDOUDGLRFRQWURO@
An
S.BUS2
servo connected to a conventional receiver operates as a
conventional servo. The channel becomes the receiver connection point.
*The contents set by programmable function are effective.
$ERXWWKH6%866%86V\VWHP
S.BUS hub
S.BUS hub
S.BUS or S.BUS2 output
Ch output/
Battery terminal
S.BUS or S.BUS2
compatible
receiver
Battery
S.BUS2 servo
Conventional
servo
ID
:
×××-×××××
ID
:
×××-×××××
ID
:
×××-×××××
ID
:
×××-×××××
ID
:
×××-×××××
Rubber grommet
Screw
(Airplane)
(Helicopter)
Eyelet
Servo mount
Rubber grommet
Screw
Eyelet
Servo mount
6%86
VHUYR
→
LWFDQEHXVHGLQ
6%86DQG6%86SRUW
6%86
VHUYR
→
LWFDQ
not
EHXVHGLQ
6%86SRUW
Содержание HV S3177SV
Страница 1: ......
