S.BUS2/S.BUS Receiver
S.BUS2/S.BUS Receiver
Main Receiver
SubReceiver
To S.BUS2/S.BUS port
To S.BUS2/S.BUS port
For ESC that supplies power to receiver,
disconnect the positive (red) power line.
When not using S.BUS servo
Use SBD-2
SBD series
S.BUS decoder
Set to 3CH
When using ESC
Servo/Receiver Battery
Do not power the receiver from the ESC
TB16PP
6 Terminal BOX
Various telemetry sensors, S.BUS2 gyro, etc.
FDLS-1
S.BUS servo
HUB
HUB
Do not connect the servo, S.BUS2 sensor,
or Battery directly to the receiver. A
large current may flow through the
FDLS-1 and cause a malfunction.
Ideally, the four antennas mounted
on one fuselage should be placed in
different directions.
Wiring
Wiring
FUTABA CORPORATION
Hobby Radio Control Business Center Sales & Marketing Department
1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba-ken, 299-4395, Japan
TEL: +81-475-32-6051, FAX: +81-475-32-2915
©FUTABA CORPORATION 2021, 4 (1)