FUTABA 4PL-2.4G Скачать руководство пользователя страница 48

Страница: 48 / 105

(HOME screen)

100

Fu
n

tio

End Point Adjuster "EPA"

(Preparation)

- Display the THROTTLE 1 menus to be set.

- Before setting the throttle end point adjustment(EPA), set the

throttle ATL lever (initial setup: DT4) to the maximum throttle

angle position 100%.

- Select the setting item "EPA-F" by (UP) or (DN) button.

Throttle (forward side) adjustment

Pull the throttle trigger fully to the high side and use

the (+) or (-) buttons to adjust the throttle angle.

However, when using an FET amp, set to 100%.

Throttle (brake side/reverse side) adjustment

Move the throttle trigger fully to the brake side and

use the (+) or (-) buttons to adjust the throttle angle.

However, when using an ESC, set to 100%.

When ending, return to the menu screen by pressing the (CT)

button.

Throttle (EPA) adjustment

(Preparation)

- Refer to P44 and display the channel 3 or channel 4 menu and

make the following adjustments:

3rd/4th channel servo (up side) adjustment

Select the setting item "EPA-U" by (UP) or (DN) button, and

set the 3rd or 4th channel dial fully to the up side (+ side)

and use the (+) or (-) buttons to adjust the servo angle.

3rd/4th channel servo (down side) adjustment

Select the setting item "EPA-D" by (UP) or (DN) button, and

set the 3rd or 4th channel dial fully to the down side (- side)

and use the (+) or (-) buttons to adjust the servo angle.

When ending, return to the menu screen by pressing the (CT)

button.

3rd & 4th channel servo (EPA) adjustment

Adjust button

- Use the (+) and (-) buttons to

make adjustments.

- Return to the initial value "100"

by pressing the (+) and (-) but-
tons simultaneously for about 1
second.

Throttle EPA

EPA-F

:0~120

EPA-B

:0~120

Initial value :100

Adjust button

Adjust with the (+) and (-) but-

tons.

- Return to the initial value "100"

by pressing the (+) and (-) but-
tons simultaneously for about 1
second.

3rd & 4th channel EPA

EPA-U

:0~120

EPA-D

:0~120

Initial value :100

Содержание 4PL-2.4G










































































































Результаты поиска

Содержание 4PL-2.4G

Отзывы:

Бренды по названию

Популярные бренды

FUTABA 4PL-2.4G, Инструкция по эксплуатации

Результаты поиска

Содержание 4PL-2.4G

Отзывы:

Бренды по названию

Популярные бренды