background image

22

INTRODUCTION 

INTRODUCTION 

Thank you for purchasing the Futaba

®

 4EX digital proportional R/C aircraft system. If this is your first 

computer

 radio, rest 

assured that it is designed to make initial setup and field-tuning of your airplane easier and more accurate than would be if 

using a 

non-computer

 radio. Although this is a 

beginner

 or 

sport

 system with the requirements of those flyers in mind, in 

order to make the best use of your Futaba 4EX and to operate it safely, 

you must carefully read all of the instructions.

 

Suggestion: 

Suggestion: 

If, while reading the instructions, you are unclear of some of the procedures or functions and become 

stuck,

 

continue to read on anyway. Often, the function or procedure will be explained again later in a different way providing another 

perspective from which to understand it. Another suggestion is to connect the battery, switch and servos to the receiver and 

actually operate the radio on your workbench as you make programming changes. Then, you

ll be able to see the effects of 

your programming inputs. 

SERVICE

SERVICE

 

(in USA)

  

If any difficulties are encountered while setting up or operating your system, please consult the instruction manual first. For 

further  assistance  you  may  also  refer  to  your  hobby  dealer,  or  contact  the  Futaba  Service  Center  at  the  web  site,  fax 

number or telephone number below:  

www.futaba-rc.com

www.futaba-rc.com

Fax: (217) 398-7721

Fax: (217) 398-7721

Telephone (8:00 am to 5:00 pm Central time Monday through Friday): (217) 398-8970, extension 2

Telephone (8:00 am to 5:00 pm Central time Monday through Friday): (217) 398-8970, extension 2

 

If unable to resolve the problem, pack the system in its original container with a note enclosed and a 

thorough, accurate

 

description of the problem(s). Include the following in your note: 

• 

Symptoms.            

• 

Any unusual mounting conditions. 

• 

An inventory of items enclosed.       

• 

The items that require repair. 

• 

Your name, address, and telephone number.            

 Include the warranty card if warranty service is requested.

Send your system to the authorized Futaba R/C Service Center at the address below: 

Futaba Service Center 

Futaba Service Center 

3002 N Apollo Drive Suite 1 

3002 N Apollo Drive Suite 1 

Champaign, IL 61822 

Champaign, IL 61822 

This product is to be used for sport and recreational flying of radio-control models only. Futaba is not 

responsible for the results of use of this product by the customer or for any alteration of this product, 

including modification or incorporation into other devices by third parties. Modification will void any 

warranty and is done at the owner

s risk. 

(USA only)

(USA only)  

Protect the environment by disposing of rechargeable batteries responsibly. Throwing rechargeable 

batteries into the trash or municipal waste system is illegal in some areas. Call 1-800-8-BATTERY 

for information about Ni-Cd battery recycling in your area. 

TABLE OF CONTENTS

TABLE OF CONTENTS

Introduction..................................................................... 2

Service ............................................................................ 2

Contents and specifications........................................... 3

Glossary.......................................................................... 3

Introduction to the 4EX system ...................................... 4

Transmitter controls and descriptions ........................... 4

Radio installation ............................................................ 5

Receiver and servo connections.................................... 7

Charging the Ni-Cd batteries .......................................... 7

LCD and Programming controls..................................... 8

Programming the T4EX radio ......................................... 9

Model select / Data reset

...........................................10

Servo reversing ........................................................

10

End Point Adjustments

..............................................11

Trims

........................................................................11

Exponentials

.............................................................11

V-tail mixing

..............................................................12

Elevon mixing

...........................................................12

Flow chart

.................................................................13

Other T4EX functions.....................................................14

Trainer switch

...........................................................14

Adjustable-length control sticks

..................................14

Changing the stick mode

...........................................14

Flying safety guidelines.................................................15

Flight preparation...........................................................16

Model Data Recording Sheets .......................................17

Futaba Accessories .......................................................20

Содержание 4EX



















Отзывы: