60
Functions
(Initial screen)
Use the
or
button to select the
menu screen.
Press the
button.
Use the
or
button to select the
function.
Press the
button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the
and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the
or
button to
select the setup item.
*
blinks at the current
setup item.
(Initial screen)
MENU
Timer/TIMER
* Minute display (m)
* Second display (s)
* 1/100 second display
Timer selection
First, select the type of timer at the
"TYPE" item. The setup screen
varies depending on the type of
timer. This figure shows the UP
TIMER setup screen.
Timer selection (TYPE)
UP TIMER
: Up timer
DOWN TIMER
: Down timer
LAP MEMORY
: Lap timer
LAP NAVIGATE : Navigation timer
LAP NAVIGATE timer
LAP NAVIGATE timer function
- This function sounds a buzzer at a fixed interval after the timer starts. Since only the
buzzer can be restarted when the switch is pressed during timer operation, this func-
tion can be used as the training run, etc. target time. (Lap navigation alarm) The
passage of time is announced by sounding of a buzzer ([Pee] sound) every minute
after starting.
- The first start operation can be linked with the throttle stick.
- The alarm sounds (alarm/prealarm) can be set separately from the fixed interval
buzzer.
Alarm: Generates a [Pee] sound at the set time (min-
utes).
Prealarm: Alarm advance announcement sound.
Sounding starts the set time (seconds) before the alarm.
(PeePeePee, PeePeePee, -----)
- After starting, the timer is enabled and can be stopped by switch even when the
display switches to another screen.
