FUST NOVAMATIC WA 126 E Скачать руководство пользователя страница 14

57

SM2209

MAINTENANCE

CLEANING THE  FILTER

ATTENTION!! 

Before starting the operations described below, make 

sure that the washing machine is empty.  Do not remove 
the fi lter while the machine is running, or when full of 
water.

Place a cloth or fl at plate under the fi lter to collect any water that may still be inside 

it.  Open the fi lter door, unscrew the fi lter and remove it, turning in an anticlockwise 

direction (fi g.24-25).

The fi lter must be cleaned periodically.

Rinse the fi lter under running water to eliminate all waste.  Replace the fi lter, screwing 

in a clockwise direction and making sure it is hermetically sealed.

CLEANING THE WASHING  MACHINE

The washing machine has been designed to reduce maintenance to a minimum.  
However, it is important that you remember to clean it regularly.

Before cleaning, make sure that the appliance has been disconnected from the power 
supply and that the water supply tap has been turned off.

The external structure and the parts of the washing machine in plastic must be 

cleaned with a soft damp cloth only.

WARNING!!    Never use chemicals, abrasive products, alcohol, soap, petrol 

or other solvents to clean the appliance as these may cause 
damage. (fi g.21)

After washing, leave the door open for a little while to allow rubber parts to dry.

Wash out the detergent compartments from time to time. To do this, extract the 

detergent compartment and rinse it under running water, (fi g. 22) then replace it. 

REMOVING THE DETERGENT DRAWER 

 

open the detergent drawer;

 

press on the word “PUSH” with the right hand and pull out the drawer with the 

left hand (fi g. 23)

22

23

GB

21

24

25

Содержание NOVAMATIC WA 126 E

















Отзывы: