FUST NOVAMATIC WA 106 E, Руководство пользователя

Страница: 11 / 16

54
SM2210
USING THE MACHINE
27
GB
PROGRAMMER KNOB “STOP”:
The stop function resets the washing machine.
If, for any reason, you want to change the wash programme or add more washing to
the load during the wash cycle, simply place the programmer knob in position “
STOP
”,
then re-position the knob on the new programme and press the “
START
” button.
STOP
23
OPTIONAL FUNCTIONS
When this button is pressed, the machine carries out a pre-wash cycle at a maximum
temperature of 40°C.
This function can only be used with the “ COTTON ” and “ SYNTHETIC ” programmes.
N.B. When using this function, remember to put some detergent
in the pre-wash compartment too.
24
25
PREWASH:
SPIN EXCLUSION:
When this button is pressed, the machine carries out a wash cycle and stops before
spinning.
NB. The use of this function depends on the type of programme selected. Consequently,
if the wash programme does not include this function, the button cannot be enabled (see
“PROGRAMME TABLE”).
26
ENERGETIC WASH:
When this button is pressed, the machine carries out a wash cycle at the set tem-
perature but for longer.
The button is active with “
COTTON
” and “
SYNTHETIC
” programmes.
Warning!! only use this function if strictly necessary and then only if the programme to reset
has been running for a few minutes. Before opening the door after a reset, wait 2 minutes
for the locking mechanism to release.