background image

opErATing insTrucTions

Please keep for future reference

Thank you for purchasing this PODIUM ESC 17T. We are sure you will be pleased 

with its performance and features. In order to ensure that you obtain the 

maximum benefit from its operation, please read these instructions carefully.

SpECIAL FEATUrES

• Fully programmable 
• Excellent high output ESC
• Ultra high frequency & performance
• Forward & reverse w/ A.B.S (Anti-lock Brake System)
• Easy-to-use single button setup
• Speed up function
• Reverse delay function.
• High-temperature safety cut-off system prevents overheating damage
• Battery type for NiCd, NiMH & LiPo can be separately set.
• Safety protection from over discharge.
• No need to set the transmitter’s throttle switch.
• MOSFET transistor operation for maximum power output & the greatest efficiency.
• Factory installed radio, battery, and motor connectors.

PODIUM

Programmable RC Car Speed Controller

17 Turn

FS-POD17T

Содержание Podium ESC 17T

Страница 1: ...ra high frequency performance Forward reverse w A B S Anti lock Brake System Easy to use single button setup Speed up function Reverse delay function High temperature safety cut off system prevents overheating damage Battery type for NiCd NiMH LiPo can be separately set Safety protection from over discharge No need to set the transmitter s throttle switch MOSFET transistor operation for maximum po...

Страница 2: ...aterials to enter the ESC Only use 6 7 cells for NiCd NiMH and 2 cells for LiPo Always disconnect the battery pack from the speed controller when not in use Always turn on the ESC after plugging it into the receiver and switching on the transmitter Always check the battery polarity is correct reverse polarity will damage the speed controller Do not touch the transistors when they get hot Be carefu...

Страница 3: ...ROGRAMMING PLEASE TURN OFF THE ESC AND PROGRAM AGAIN hIGh TEmPErATUrE SAFETy CUT OUT SySTEm In case the temperature of the ESC exceeds maximum ratings the High Temperature Safety Cut Out System will temporarily shut off power to the motor to prevent overheating damage until it cools InSTALL On OFF SWITCh Choose a convenient place to mount the switch using a piece of double side tape TrAnSmITTEr AD...

Страница 4: ...UM RISING TIME SLICK TRACK ONCE TWICE LiPo Battery NiCd MH With the transmitter throttle in the neutral position press and hold the speed controller s set up button for five seconds The green red LED will blink Then release the set up button After one second the green red LED will blink once If you press and release the set up button at this point LiPo battery will be set After a further second th...

Отзывы: