FusionServer XH321 V6 Server Node
Technical White Paper
5 Hardware Description
2022-03-18
18
Silkscreen
Indicator/Butt
on
Description
network port
-
Connection
status indicator
of the
management
network port
⚫
Off: The network port is not connected.
⚫
Steady green: The network port is connected
properly.
-
PSU indicator
⚫
Off: No power is supplied.
⚫
Blinking green at 1 Hz:
−
The input is normal, and the server is in the
standby state.
−
The input is overvoltage or undervoltage.
−
The PSU is in deep hibernation mode.
⚫
Blinking green at 4 Hz: The firmware is being
upgraded online.
⚫
Steady green: The power input and output are
normal.
⚫
Steady orange: The input is normal but there is no
output.
NOTE
The possible causes of no power output are as follows:
⚫
Power supply overtemperature protection
⚫
Power output overcurrent or short-circuit
⚫
Output overvoltage
⚫
Short-circuit protection
⚫
Device failure (excluding failure of all devices)
⚫
Steady red: The output overcurrent occurs.
5.1.3 Ports
Port Positions
Figure 5-3
Ports on the front panel