Furuno VR-5020, Инструкция по модификации

Страница: 1 / 28

VDR DATA RECORDING UNIT VR-5020
Modification Procedure
(applicable to serial no. 5000 - 9999)
This technical information shows you how to modify the VR-5020.
Inner Capsule Modification Kit (Type: OP24-17-1, Code No. 000-038-228, for 6G
Type: OP24-46, Code No. 000-038-230, for 9G)
Necessary tools
No. Name Type Code No. Qty
1 Inner Capsule Assy. OP24-17-1-1 (for 6G) 001-065-820-00 1
OP24-17-2-1 (for 9G) 001-065-830-00
2 Repeater Board 24P0080(LF)-77 *HAND 001-119-590-00 1
3 Repeater Cover(1) 24-004-1243-2 100-347-102-10 1
4 Repeater Cover(2) 24-004-1244-2 100-347-112-10 1
5 Cover Fixing Washer 24-004-1245-1 100-347-121-10 1
6 Absorption Sheet 24-004-1228-1 100-333-621-10 1
7 Insulation Sheet 24-004-1232-1 100-333-641-10 1
8 Barrel Gasket 24-004-1214-4 100-312-574-10 1
9 Liner Sheet 24-004-1229-0 100-333-630-10 1
10 Protective Ring (jig) 24-004-1505-0 100-348-070-10 1
11 Fixing Plate 24-004-1246-0 100-348-050-10 1
12 Thermal Insulator Top 24-004-1247-0 100-348-060-10 1
13 Thermal Insulator(2) 24-004-1292-0 100-348-070-10 1
14 Reflective Tape 3150-A L2.5M 000-172-199-10 1
15 Pan Head Screw 3x10 SUS304 000-170-095-10 10
16 Washer Head Screw M4x10 C2700W MBNI2 000-163-167-10 2
17 Adhesive TB5211(SP) 50G 000-192-662-10 1
18 Silicone Grease KS-650N-100 (100 g) 000-166-579-10 1
19 Silicone Sealant KE-45-W-100 (100 g) 000-166-578-10 1
• Phillips Screwdriver • Plastic Head Hammer
• Slotted-head Screwdriver (total length less than 90 mm) • Box Cutter
• Hex Wrench (diagonal 5 mm)
• Ethyl Alcohol
• Protective Mask, Protective Goggles, Rubber Gloves • Waste Cloths
• Cellophane tape • Torque wrench (10.0 Nm adjustable)
TOP
Projection
Post
Nameplate
BOTTOM
Data Recording Unit VR-5020
www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.