22
6.
Retrofitting from Previous NavNet Series Black Box
The following table summarizes compatible and incompatible items and necessary actions when retrofitting from previous navNet series black boxes to the TZT2BB.
No
Item
From NavNet vx2: GD-1920C-BB to TZT2BB
From NavNet 3D: MFDBB to TZT2BB
From NavNet TZtouch: TZTBB to TZT2BB
1
Points
Routes
Tracks
The data format of NavNet vx2 can be converted to NavNet TZtouch2
format with the conversion menu on TZTL12F/15F and TZT2BB as
described in Sales Bulletin
FSB15-0018
. Points, routes, and tracks from
the GD-1920C-BB can be imported to the TZT2BB after conversion.
Points, routes, and tracks can be utilized on the TZT2BB.
(1)
Insert an SD card to one of the card slots of MFDBB.
(2)
Export the data to the SD card (CSV format only).
(3)
Insert the SD card via an SD/USB adapter to an USB por of TZT2BB. (Or
copy the data from SD card to a USB memory before inserting it to the
USB port of TZT2BB.)
(4)
Import the data to the TZT2BB.
Points, routes, and tracks can be utilized on the TZT2BB.
(1)
Insert an SD card to one of the card slots of TZTBB.
(2)
Export the data to the SD card. While TZ, CSV, GPX, and KLM
formats are available, [TZ] (TimeZero) is recommended.
(3)
Insert the SD card via an SD/USB adapter to a USB port of
TZT2BB. (Or copy the data from SD card to an USB memory
before inserting it to the USB port of TZT2BB.)
(4)
Import the data to the TZT2BB.
2
Settings
Setting data cannot be transferred to the TZT2BB (NavNet TZtouch2).
Set each menu and other items on the TZT2BB.
Setting data cannot be transferred to the TZT2BB (NavNet TZtouch2). Set
each menu and other items on the TZT2BB.
Setting data cannot be transferred to the TZT2BB (NavNet
TZtouch2). Set each menu and other items on the TZT2BB.
3
Charts
Charts on NavNet vx2 (C-MAP NT MAX or Navionics Gold) are not
compatible with NavNet TZtouch2. Use MapMedia charts (mm3d
format).
NavNet 3D models including the MFDBB and NavNet TZtouch2 can use the
same MapMedia chart format (mm3d format). Purchased chart unlock
codes for NavNet 3D can be utilized on NavNet TZtouch2 via System ID
Exchange as described in Sales Bulletin
FSB15-0015
.
NavNet TZtouch models including the TZTBB and NavNet
TZtouch2 can use the same MapMedia chart format (mm3d
format). Purchased chart unlock codes for NavNet TZtouch can
be utilized on NavNet TZtouch2 via System ID Exchange as
described in Sales Bulletin
FSB12-0007
.
4
Processor
Replace with the TZT2BB processor MPU-004 and switch box PSD-003. Replace with the TZT2BB processor MPU-004 and switch box PSD-003.
Replace with the TZT2BB processor MPU-004 and switch box
PSD-003.
5
Processor
Dimensions
The TZT2BB processor dimension (W383×D299×H130 mm) is larger
than the GD-1920C-BB (W275×D270×H64 mm). Reserve the space for
the TZT2BB processor unit.
The TZT2BB processor dimension (W383×D299×H130 mm) is smaller than
the TZTBB (W430×D411×H184 mm).
The TZT2BB processor dimension (W383×D299×H130 mm) is
smaller than the TZTBB (W395×D350×H209 mm).
6
Processor Power
Cable
The power cable with a unique connector is not compatible with the
TZT2BB. Use the standard TZT2BB processor power cable.
The power cable is arranged locally to connect to the terminal board on the
MFDBB. Use the standard TZT2BB processor power cable.
The power cable with a unique connector is not compatible with
the TZT2BB. Use the standard TZT2BB processor power cable.
7
Control Unit
The control unit RCU-017 is not compatible with the TZT2BB.
Replace it with MCU-005 or convert it to MCU-005 using the conversion kit
OP19-19.
Install a PoE hub to feed power to the MCU-005.
If a multi touch monitor is installed for full operation by touch, the MCU-005
is not mandatory.
Optional compact remote controllers MCU-002 and MCU-004 can
be utilized with the TZT2BB. If a larger keyboard is required,
install the MCU-005 connected via a PoE hub.
If a multi touch monitor is installed for full operation by touch, the
MCU-002/004/005 is not mandatory.
8
Control Unit
Dimensions
The MCU-005 dimension is slightly larger than the RCU-017 and the
MCU-005 cutout hole size is narrower than the RCU-017.
Dimensions:
MCU-005: W293×H100×D123.5 (incl. service space) mm
RCU-017: W290×H90×D134.6 (incl. service space) mm
Cutout Hole Size:
MCU-005: W268×H83 mm
RCU-017: W280×H80 mm
The dimension and cutout hole size of MCU-001 and MCU-005 are identical.
When a new MCU-005 is installed, just mount the MCU-005 at the place of
MCU-001.
-