Furuno P4800, Руководство пользователя

Страница: 23 / 30

MOB SETUP
In List or Plotter mode, press the knob to enter the info. mode.
7.4.3 BAUD RATE
User can choose between output the AIS data in 4800 or
.
The
default setting is 38400.
1. Select MENU SELCET,then AIS SETUP.
2.Select BAUD RATE,the cursor is at 38400(Which is the default
setting),Select your desired then press the CH knob to confirm your
choice.
3.If 4800 is selected,press the CH knob to advance to the warning
page . Select YES then press the CH knob to change the baud rate from
38400 to 4800.
7.4.3 GPS REDIR
The GPS redirection option is set to output the GPS information to the
chartplotter. So, no extra multiplexer is needed
.
If 'yes' is selected, the $RMC will be redirected to the chartplotter once
we received
. (
If no
$
RMC
,
other GPS sentance would be outputed
(
e
.
g
.
GLL
)
however
,
we won
'
t output all in the same time because it
may add too much loading in the slow traffic)
38400