Furuno NAVnet 1722C, Руководство оператора, Страница: 22 / 33

1. OPERATIONAL OVERVIEW
1-6
1.3 Turning the Unit On/Off
Press and hold down the [POWER/BRILL] key to turn the unit on. A beep sounds
and the equipment proceeds in the sequence shown below, displaying the startup
screen, startup test results and the chart usage disclaimer in that order. The
startup test checks the ROM, RAM, internal battery and backup data for proper
operation, displaying the results for each if there is NG (No Good). If error is
found an appropriate message appears on the screen. For any NG, try to press
any key to go to the chart disclaimer screen.
RADAR PLOTTER
STATION NAME:
FLYBRG
FURUNO ELECTRIC CO., LTD.
CHARTS AVAILABLE
FLYBRDG = ANB01004
RADAR = ANB01003
LICENSE NO.********
STARTUP TEST
ROM
NG
RAM NG
BACKUP DATA NG
INTERNAL BATTERY NG
NO NATIONAL HYDROGRAPHIC
OFFICE HAS VERIFIED THE
INFORMATION IN THIS
COASTLINE DATA CARD AND NONE
ACCEPT LIABILITY FOR THE
ACCURACY OF REPRODUCTION OR
ANY MODIFICATIONS MADE
THEREAFTER. THIS PRODUCT WITH
THIS COASTLINE DATA CARD
DOES NOT REPLACE THE
REQUIREMENT TO USE THE
APPROPRIATE PRODUCTS FOR
NAVIGATION ACCORDING TO
NATIONAL AND INTERNATIONAL
REGULATIONS.
è
è
Product information Startup test Chart disclaimer
If error is found appropriate
message appears here.
PROGRAM No. 14519010**
** = Program version no.
(Only when NG is found.)
Startup sequence
You may press any key at the chart disclaimer screen to show the last-used radar
display, or wait several seconds to let the equipment do it for you.
To turn the unit off, press and hold down the [POWER/BRILL] key. Release the
key when you see the timer which counts down the time remaining until the unit is
shut off. To protect the LCD attach the hard cover.
Note: The very first time the system is powered the display shows the message
displayed below which asks you if you want to start the demonstration
mode. Press the [ENTER] knob to start the demo mode, or press the
[CLEAR] key to start normal operation. For further details about the
demonstration mode, see paragraph 1.9.
START DEMO MODE?
YES ... PUSH 'ENTER' KNOB
NO ...PUSH 'CLEAR' KEY
(CLEAR KEY TO SKIP DEMO.)