Furuno MU-200, Руководство оператора

Страница: 13 / 39

5
Connecting FCV-1200 series
Using the cables designated below (or equivalent) to connect the FCV-1200 series makes
the interface unit of the FCV-1200 series unnecessary. The mini D-SUB 15 P connector
cannot be used to connect the FCV-1200 series.
Navigator
FCV-1200 Series:
CONTROL UNIT CONT
FCV-1200 Series:
PROCESSOR UNIT CN1
Cable type
06S4078
Cable type
MJ-A10SPF0002-015
100 - 240 VAC
Ground
Terminal
Display unit, rear view, wiring using specialty cables
Notes on wiring
•
The cover of the D-SUB connector of the cable 06S4078 may be removed to pass the
cable through tubing, bulkhead, etc. Use vinyl tape to bind connector wiring and rubber
cover. This allows the cable to be passed through a hole having a diameter of 30 mm.
•
Attach connector SRCN6A13-3S (supplied in installation materials) to the power cable
(cable DPYC-1.5 (Japan Industrial Standard) or equivalent).
Sectional view of cable DPYC-1.5
Armor
Conductor
S = 1.5 mm
2
f
= 1.56 mm
Vinyl
sheath
Armor
2 1
3
Connector Housing
Screw
Clamp
Tighten
set screw
Connect to
"1" and "2".
Solder Side
Armor
2 cm
Sheath
3mm
Armor
Attaching connector SRCN6A13-3S
1: AC (L: Live line)
2: AC(N: Neutral line)
How to attach connector SRCN6A13-3S; sectional view of power cable DPYC-1.5