Furuno MU-190, Руководство оператора

Страница: 23 / 76

2. ADJUSTMENTS
14
How to open the [INSTALLATION SETTING] menu
Turn off the monitor unit. While you hold the DISP key, press the /BRILL key to turn on the mon-
itor unit. Press and hold the DISP key for more than five seconds.
Note: When the "DVI PWR SYNC" slide switch is ON, turn on the connected external equipment
while you press the DISP key to turn on the monitor unit.
2.2 RGB/DVI Setting (For Non-SOLAS)
You can adjust the screen from the RGB, DVI-D1 and DVI-D2 ports individually. Turn on each ex-
ternal equipment and adjust the monitor unit as follows.
1. Select the signal to adjust at the DISP selection window. See section 3.4.
1) Press the DISP key.
2) Press the S or T key to select [RGB], [DVI1] or [DVI2].
2. Press the MENU key to show the menu. The main menu closes automatically when there is
no operation for one minute.
3. Press the W or X key to select [RGB], [DVI1] or [DVI2]. The current setting (the cursor) is
shown in orange. The menu items available depend on the selected menu. The [DVI1] and
[DVI2] setting menus contain the same items.
Note: The menus in gray are not available because of no signal.
4. Press the S or T key to select the menu item to adjust.
5. Press the W or X key to adjust the setting.
6. Press the MENU key to close the menu.
RGB DVI1 DVI2 VIDEO OSD SYSTEM
H_SIZE
V_SIZE
PHASE
BRIGHTNESS
CONTRAST
H_POSITION
V_POSITION
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS
1280
1024
16
128
32
50
20
128
128
128
7000K
OFF
OFF
FULL
5
(1~32)
(1~256)
(1~64)
(1~99)
(1~40)
(1~256)
(1~256)
(1~256)
(5000K~9300K)
(OFF, 1~10)
(OFF, 1~10)
(FULL/NORMAL)
(1~10)
Menu
Menu
item
RGB DVI1 DVI2 VIDEO OSD SYSTEM
BRIGHTNESS
CONTRAST
H_POSITION
V_POSITION
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS
128
32
25
20
128
128
128
7000K
OFF
OFF
FULL
1
(1~256)
(1~64)
(1~50)
(1~40)
(1~256)
(1~256)
(1~256)
(5000K~9300K)
(OFF, 1~10)
(OFF, 1~10)
(FULL/NORMAL)
(1~10)
RGB setting menu
DVI setting menu