Furuno GS-100, Руководство оператора

Страница: 64 / 157

6. BERTHING DISPLAY
6-10
6.5.3 How to select the past track format
The past track can be shown with past track (ship) markers or solid line and past track
markers. See the illustration at paragraph 6.5.1.
1. Press the MENU ESC key to open the menu.
2. Select [Past Tracks] then press the ENT key.
3. Select [ON] or [OFF] then press the ENT key.
[ON]: Past track (ship) solid line
[OFF]: Past track (ship) marker only
4. Press the DISP key to close the menu.
6.5.4 How to select the predicted track plot interval
Select the interval at which to plot the predicted track as follows:
1. Press the MENU ESC key to open the menu.
2. Select [Plot Time] then press the ENT key.
3. Select a time then press the ENT key. A new marker
is plotted at equally time-spaced intervals of 1/5 of
the plot time selected. For example, if you select the
10-minute interval, the predicted position is plotted
at two-minute intervals.
4. Press the DISP key to close the menu.
6.6 How to Show, Hide Navigation Data and 3-axis
Speed Data
The berthing display can show NAV data and 3-axis speed data. You can show them
in separate windows, show the 3-axis speed data in the NAV data window, or show
only the 3-axis speed data (no NAV data). Long-push the
ENT key to show or hide the
data, in the sequence shown below.
The data can also be shown or hidden from the menu.
1. Press the MENU ESC key to open the menu.
2. Select [Scale Set Up] then press the ENT key.
3. Select [Data Display] then press the ENT key.
4. Select an option then press the ENT key.
5. Press the DISP key to close the menu.