Furuno GP-3700F, Руководство оператора

Страница: 138 / 224

10. HOW TO RECORD, PLAY BACK DATA
10-4
10.2.3 How to play back data from the internal memory
Data in the internal memory can be loaded to the working memory and played back
on the screen. However, loaded waypoint/route and setting data will replace current
data or add to current data, depending on play back method. For that reason, you may
want to record the current display before replaying data.
1. Press the MENU key to open the main menu.
2. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
3. Select [4. INTERNAL MEMORY PLAYBACK].
4. Select an item to replay.
5. Select [ADD] or [OVERWRITE] depending on the item selected at step 4.
[ADD]: Adds the selected data to the current display data.
[OVERWRITE]: Overwrites the current display data.
Note: When setting [RECORD MARK/TRACK] to [ADD], the selected data can
not be added if the memory capacity is reached (30,000). For [REC OWN TRK] or
[REC OTHR TRK], the oldest data is erased to make room for the latest. For ex-
ample, when 25,000 track points for own ship are added to the current 10,000
track points, the old 5,000 track points of the current 10,000 track points are
erased. Then 25,000 track points are added to the remaining 5,000 track points.
6. Repeat steps 4 and 5 to replay other data.
7. Select the data to replay from [DATA SELECTION]. The message "LOAD FILE.
ARE YOU SURE? (THE SYSTEM WILL REBOOT WHEN THE FILE IS LOAD-
ED.)" appears.
8. Select [RUN] to replay the data.
9. When the message of loading end appears, push the
ENTER knob.
10. Press the DISP key to close the menu.
2000 1500 1300 70 20
2150 1650 1350 85 22
2700
2550
2600 1900
1800
1850
1800
1550
1650 135
95
120
27
25
26
1:20150101094126
2:20150101094127
3:20150101094128
4:20150101094129
5:20150101094130
12000/30000
1600/10000
3100/10000
2800/10000
1200/10000
7650/30000