Furuno GP-3700, Руководство оператора

Страница: 103 / 185

8. ALARMS
8-5
3. Select [XTE/BORDER ALARM] on page 1.
4. Select [OFF COURSE] or [INTRUSION].
5. Select [ALARM RANGE].
6. Press the numeric keys to set the alarm range (setting range: 0.001 to 9.999 NM).
7. Press the
DISP key to close the menu.
To deactivate an alarm, select [OFF] at step 4.
8.5 Intrusion Point Alarm
The intrusion point alarm alerts you when your vessel nears a waypoint by the dis-
tance set for that waypoint on the waypoints list. The distance is called the intrusion
ban alarm radius (see section 5.1.3). When the intrusion point alarm is active, a red
dashed circle marks the intrusion ban alarm radius.
1. Press the MENU key to open the main menu.
2. Select [6. ALARM SETTINGS].
3. Select [INTRUSION POINT ALM] on page 1.
4. Select [ON].
5. Press the
DISP key to close the menu.
To deactivate an alarm, select [OFF] at step 4.
8.6 Ship Speed Alarm
The ship speed alarm warns you when your boat’s speed is within or over the speed
range set.
1. Press the MENU key to open the main menu.
2. Select [6. ALARM SETTINGS].
3. Select [SHIP SPEED ALARM] on page 1.
4. Select [WITHIN RANGE] or [OUT OF RANGE].
5. Select [MINIMUM SHIP SPEED].
6. Press the numeric keys to enter the minimum ship speed (setting range: 0 to 999.9
kn).
7. Select [MAXIMUM SHIP SPEED].
8. Press the numeric keys to enter the maximum ship speed (setting range: 0 to
999.9 kn).
9. Press the DISP key to close the menu.
To deactivate an alarm, select [OFF] at step 4.
Alarm range (Radius depends on
the setting of [INT. BAN] in the
[EDIT WPT NAME] window.)