1-1
1. Installation of Standard Equipment
1.1 Installation of Display Unit
Mounting considerations
The display unit can be installed on a tabletop, on the overhead or flush mounted
in a console or panel.
Overhead
Tabletop
Hard Cover
Figure 1-1 Tabletop, overhead mounting methods
When selecting a mounting location for the display unit keep the following in mind:
•
Keep the display unit out of direct sunlight.
•
The temperature and humidity should be moderate and stable.
•
Locate the unit away from exhaust pipes and vents.
•
The mounting location should be well ventilated.
•
Mount the unit where shock and vibration are minimal.
•
Keep the unit away electromagnetic field generating equipment such as motor,
generator.
•
For maintenance and checking purposes, leave sufficient space at the sides
and rear of the unit and leave slack in cables.
•
A magnetic compass will be affected if placed too close to the display unit.
Observe the following compass safe distances to prevent disturbance to the
magnetic compass:
Standard compass: 0.98 meters
Steering compass: 0.74 meters
•
Rubber Cushions which absorb vibration (supplied) maybe attached as below
if vibration is a problem.
45 5mm
Aline with edge
of hanger.
Rubber cushion
TM-166 No.18 black
