Furuno GP-1650WDF, Установка и обслуживание

Страница: 21 / 74

1. INSTALLATION
1-13
φ
79 mm
133 mm
2.00"-12 UN
threads
φ
51 mm
27 mm
7 mm
140 mm
Dimensions pf triducer 525ST-MSD
525ST-PWD
The Transom Mount Transducer or TRIDUCER
®
Multisensor with Integral Release Bracket
525ST-PWD is manufactured by AIRMAR Co. These instructions are included with the
sensor.
Pre-test for speed and temperature
Connect the sensor to the instrument and spin the paddlewheel. Check for a speed reading
and the approximate air temperature. If there is no reading, return the sensor to your place
of purchase.
Tools and materials needed
Scissors
Masking tape
Safety goggles
Dust mask
Electric drill
Drill bit for:
Bracket holes: 4mm, #23,
or
9/64”
Fiberglass hull: chamfer bit (preferred),
6mm,
or
1/4”
Transom hole: 19mm
or
3/4” (optional)
Cable clamp holes: 3mm
or
1/8”
Screwdrivers
Straight edge