2
This manual is printed with
soy ink.
Selecting Mark Shape/Line
Type
1) Press
MENU ESC
and
2
.
2) Press
▲
or
▼
to select Mark Shape (or
Mark Line).
3) Press
◄
or
►
to select mark shape (or
mark line) desired.
4) Press
NU/CU ENT
.
5) Press
MENU ESC
.
Entering Event Mark
Press
EVENT MOB
momentarily.
Entering MOB Mark
1) Press
EVENT MOB
(about three seconds)
until “Save MOB position” appears.
2) Press
NU/CU ENT
.
Starting/Stopping Plotting and
Recording of Track
Press
PLOT ON/OFF
. “
H
” appears when
recording is disabled. “
H
” disappears when
recording is enabled.
Registering Waypoints
A waypoint can be entered by several ways.
Below is the procedure for entry by the
cursor.
1) Press
WPT RTE
.
2) Press
1
to select Cursor.
3) Operate the cursor pad to place the cursor
on the position desired for a waypoint.
4) Press
NU/CU ENT
.
5) Press
▼
to select Mark column.
6) Press
◄
or
►
to select mark shape.
7) Press
NU/CU ENT
.
8) Enter comment (maximum 12 alphanu-
meric characters).
9) Choose “ENTER” and press
NU/CU ENT
.
10)Press
NU/CU ENT
.
Registering Routes
1) Press
WPT RTE
.
2) Press
6
(
5
for Dual) to select Route
Planning.
3) Press
▲
or
▼
to select route number.
4) Press
►
.
5) Enter waypoint number (three digits).
6) Press
▼
.
7) Repeat steps 5 and 6 to enter next
waypoint number.
8) Press
MENU ESC
twice to quite.
Setting/Cancelling Destination
Destination can be set by four ways. Below
is the method for setting destination by the
cursor.
1) Press
GOTO
.
2) Press
1
to select Cursor.
3) Place the cursor on the position to set as
destination.
4) Press
NU/CU ENT
twice.
To cancel destination,
press
GOTO
,
5
,
NU/CU ENT
.
Setting the Arrival Alarm
1) Press
MENU ESC
and
4
.
2) Press
▲
or
▼
to select Arrival/Anchor.
3) Press
◄
to select “Arr.”
4) Press
▼
to select “Alarm Range.”
5) Enter arrival alarm range.
6) Press
NU/CU ENT
.
7) Press
MENU ESC
.
The buzzer may be silenced by pressing
CLEAR
.
P U B . N O . O S E - 4 4 4 0 0 - A
( 0 6 0 2 , H I M A ) G P - 1 5 0 / D U A L
