Furuno FSS-3BB Скачать руководство пользователя

Страница: 18 / 121

1. OPERATION

1-6

1.3.5

InstantAccess bar™ icons list

The table below shows all the InstantAccess bar™ menus, their respective menu
items and available options, along with a brief description. For full details on each
menu and menu items, see the respective sections of the manual.

Icon

Description/Options

Menu

Item

[Sounder] menu icon.
Accesses the sounder-related settings.

[Interference Rejection] icon.
Accesses the [Interference Rejection] function. See section 1.10.

[Smoothing] icon.
Accesses the [Smoothing] function. See section 1.11.

[Clutter] icon.
Accesses the [Clutter] (low level noise reduction) function.
See section 1.12.

[Zoom Mode] icon.
Accesses the [Zoom] functions. See section 1.13.

[Measure Fish Size] icon.
Accesses the fish measurement area settings. See section 2.3.2. The
available settings are:

[IDENTI-FISH] icon.
Shows the IDENTI-FISH

™

graph.

See section 2.2.

[Display] menu icon.
Accesses the display-related settings.

[Window Color] menu.
Changes the display colors to suit day or night viewing. See section 1.14.
The available options are:

[A-Scope] icon.
Shows/hides the A-scope. See section 1.15.

[Depth] icon.
Shows/hides the depth indication. See section 1.16.

Measures fish over the entire display.
See section 2.3.3.
Measures fish within a specified depth range.
See section 2.3.4.

Measures fish that appear near the seabed.
See section 2.3.5.

Measures fish within a specified area on the display.
See section 2.3.6.

Sets the display colors for Daytime viewing.

Sets the display colors for Nighttime viewing.

Содержание FSS-3BB


























































































































Результаты поиска

Содержание FSS-3BB

Отзывы:

Похожие инструкции для FSS-3BB

Бренды по названию

Популярные бренды

Furuno FSS-3BB, Руководство оператора

Результаты поиска

Содержание FSS-3BB

Отзывы:

Похожие инструкции для FSS-3BB

Бренды по названию

Популярные бренды