Night Mode
Night mode is selectable for wheelhouse operation.
Reliable MF/HF Radiotelephone
for general and distress communications
with integrated DSC/DSC Watch Receiver
▲
MF/HF radiotelephone with DSC facility
▲
Fully meets GMDSS carriage requirements for SOLAS ships operating in A3 and A4 sea areas
▲
Meets the new ITU recommendation on digital selective calling system for use in the Maritime
Mobile Service, ITU-R M.493-13
▲
High-contrast 4.3" bright color LCD (480x272 pixels)
▲
Capable of distress, safety and routine communication
▲
Instant selection of 256 user-specified channels with a rotary knob or direct keypad input
▲
Quick access to DSC message composition by dedicated keys on the control unit
▲
Full-duplex kit available (optional supply for the FS-5075 only)
▲
Quick access to dedicated functions in the menu operation using numeric keypad
FS-1575 (150 W)
FS-2575 (250 W)
FS-5075 (500 W)
Models:
On the menu setting, three quick-access functions can be assigned for 1, 4 and 7 on
the numeric keypad, and those assigned functions are displayed on the Radiotelephone
display. The list of functions assigned for quick-access includes: TX frequency setting,
RX frequency setting, class of emission setting, AGC setting, output power setting, TX
frequency monitoring, showing the list of test messages, showing the list of message
files, execusion of daily test, showing the list of log files, and intercom functions.
Quick-access functions
Press
Press
Press
Press
2
Information segment
Displaying:
1
user channel selected
2
operating frequencies
3
class of emission, AGC, output power and communication mode
4
signal strength, meter reading (IC, VC, RF, VS and IA (antenna current))
5
currently activated functions, i.e., noise blanker, etc.
6
short-cut functions assigned for 1, 4 and 7 on the numeric keypad
7
own ship L/L, Time
8
indications of RF input attenuator ON/OFF as well as RF gain
Radiotelephone display
1
Status segment
Indicating the status of equipment, i.e., speaker ON/OFF, unread DSC message in the inbox, hardware error, etc.
Also, MMSI is shown in radiotelephone and DSC scan displays.
3
Tab segment
Up to 7 active procedures can be displayed in this segment. The procedures are for operating: radiotelephone, distress alert transmission, distress alert reception,
general DSC message transmission and general DSC message reception.
1
Status segment
Indicating status of equipment, i.e., speaker ON/OFF, unread DSC message in the inbox, hardware error, etc., TX/RX
frequencies/class of emission for successive communication.
2
Information segment
Displaying:
1
DSC contents, status and information
2
a list of available operator actions
3
indications of RF input attenuator ON/OFF as well as RF gain
DSC display
2
Information segment
Displaying:
1
DSC watch frequencies (both distress and routine)
2
own ship L/L, Time
3
indications of RF input attenuator ON/OFF as well as RF gain
DSC SCAN display
2
Information segment
Displaying menu tree
Menu display
4
Guide segment
Guide to short-cut key functions is displayed.
1
2
1
2
1
3
4
5
6
7
2
2
1
2
1
1
2
2
1
4
High-contrast 4.3" bright color LCD
Display Modes
Quick-access functions
F1, F2 and F3 on the menu
represent the functions
assigned for 1, 4 and 7
on the numeric keypad,
respectively.
8
3
3
3
3
3
