Furuno FR-10, Руководство оператора

Страница: 73 / 171

2. OPERATION
2-37
2.27.3 How to set custom setups
1. Press the MENU key to open the menu.
2. Use  or  to select [Custom 1 (2 or 3)] and press the ENTER key.
3. Set menu items.
Note 1: For easy set up, you can copy the settings of the [Echo] menu (to [Custom
1], [Custom 2] or [Custom 3]). Select [Copy] and press the ENTER key. When fin-
ished copying the settings, the message "Complete" appears. To erase this mes-
sage, press any key.
Note 2: To save the settings of the [Echo] menu (to [Custom 1], [Custom 2], [Cus-
tom 3]). Select [Save] and press the ENTER key. When the saving is completed,
the message "Complete" appears. To erase this message, press any key.
4. Press the MENU key to close the menu.
[A/C Auto] [Off], [On] section 2.13
[Pulse Length] [Short] or [Long], you can select on 1.5 and 3.0 nm ranges. section 2.21
[Echo Stretch] [Off], [1], [2], [3] section 2.25
[Echo Average] [Off], [1], [2], [Auto] section 2.30
[Int Rejector] [Off], [1], [2], [3] section 2.17
[Display-Dynam-
ic]
[Narrow] : Erase weak echoes.
[Normal] : Normal use.
[Wide] : Display weaker echoes compared to [Narrow].
section 2.29
[Display-Curve]
[1] : Reduce weak echoes.
[2] : Normal use.
[3] : Display weaker echoes in stronger color compared to [1].
section 2.31
[Color Erase] 0 - 8 section 2.39.3
[Target Analyzer] [Off], [On]
[RezBoost] [Off], [1], [2], [3]
Menu item Available settings See section