8
1.4 CURSOR POSITION INDICATOR
Description
1. Cursor position display (LAT, LON) and range and bearing from own ship position
1.5 EBL/VRM
There are two EBL/VRM measurement tools available. You can choose the operating modes of these tools
by clicking in the STAB1 or STAB2 box with your mouse.
Description
1. Blank – tool is disabled
2. Ship – the measurements are done from the ship's conning position
3. Gnd – the measurements are stabilized to ground
The EBL and VRM values are shown both on screen and in the respective boxes.
Description
1. Click on EBL1 or EBL2 will toggle the EBL between true (T) and relative (R) measure-
ments
2. Click on VRM1 or VRM2 will show or hide the VRM measurement
3. Using the scroll wheel on any box will adjust that value.
EBL/VRM can be adjusted by dragging the intersection point on the screen.
Note: you choose the point to drag by clicking on the first point with the right mouse button. To release
the drag you have to click with the right mouse button again after moving the point to the new position.
