Furuno FM-2721 Скачать руководство пользователя страница 15

Страница: 15 / 75

1. Installation

1.1 Mounting

Transceiver unit

The transceiver unit can be mounted on the overhead,

a desktop or on a bulkhead. Select the mounting

location considering the following:

•

It is recommended to install the equipment in the

cabin so as to avoid spray.

•

The equipment should be located as near to the

power source as possible, and as far apart as

possible from any devices that may cause

interference such as direction finders, navigation

receivers and other onboard electronics.

•

Compass safe distances (Standard compass,

Steering compass) are;

Standard

Steering

Transceiver unit

0.95 m

0.65 m

Handset and Bracket

2.05 m

1.40 m

Loudspeaker (option)

2.20 m

1.50 m

•

The cabinet of the equipment, especially the rear

panel, gets warm after a long transmission.

Therefore, provide some space around the unit to

allow for circulation of cooling air.

•

The unit can be mounted on the deck or a bulkhead.

The mounting location should be able to support the

weight of the unit.

•

If necessary, reinforce the mounting location by

doubling plate.

•

Fasten the unit with four tapping screws (supplied).

Содержание FM-2721












































































Результаты поиска

Содержание FM-2721

Отзывы:

Furuno FM-2721, Руководство оператора, Страница: 15 / 75

Результаты поиска

Содержание FM-2721

Отзывы: