Furuno FELCOM19 Inmarsat Mini-C MES, Руководство по установке

Страница: 30 / 51

3. INITIAL SETTINGS
3-12
3.6 How to Set the Russian Language
Do the following to create a message in Russian.
1. Press the F8 and 1 keys to show the [System Setup] menu.
2. Press
↓
to select [Command Window], and then press the Enter key.
3. Type "RUSSIAN ON" in the [Enter JOB No.:], then press the Enter key.
The language is switched to Russian and the message "Russian supported." ap-
pears at the bottom of the standby display.
To restore the previously used language, type "RUSSIAN OFF" in the [Enter JOB
No.:], then press the
Enter key. "Russian supported." disappears from the screen.
4. Switch the language to Russian on your PC.
See your PC’s owner’s manual for how to switch languages.
3.7 How to Use the Paper Save Function
The Paper Save function allows you to choose whether to print the “Successful Data
Report Sending” confirmation after a data report is sent.
1. Press the F8 and 1 keys to show the [System Setup] menu.
2. Press
↓
to select [Command Window], and then press the Enter key.
3. At the [Enter JOB No.:] prompt, type "Paper Save", then press the Enter key. A
message is displayed showing the status of the Paper Save function (ON or OFF).
4. To change the setting, type "Paper Save ON" (No report is printed) or "Paper Save
OFF" (Report is printed), as appropriate, then press the Enter key.
3.8 How to Output EGC Messages
The FELCOM can output EGC messages to a navigation device (via the FELCOM’s
LAN port) that can receive EGC messages. The output messages, in IEC 61162 for-
mat, are SM1, SM2, SM3, SM4, and SMB.