background image

i

SAFETY INSTRUCTIONS

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel
should work inside the
equipment.

Immediately turn off the power at the
switchboard if water leaks into the
equipment or something is dropped in
the equipment.

Continued use of the equipment can cause
fire or electrical shock. Contact a FURUNO
agent for service.

Do not disassemble or modify the
equipment.

Fire, electrical shock or serious injury can
result.

Do not place liquid-filled containers on
the top of the equipment.

Fire or electrical shock can result if a liquid
spills into the equipment.

Immediately turn off the power at the
switchboard if the equipment is emitting
smoke or fire.

Continued use of the equipment can cause
fire or electrical shock. Contact a FURUNO
agent for service.

Make sure no rain or water splash leaks
into the equipment.

Fire or electrical shock can result if water
leaks in the equipment.

CAUTION

A warning label is attached to the equip-
ment. Do not remove the label. If the
label is missing or illegible, contact
a FURUNO agent or dealer.

WARNING

To avoid electrical shock, do not 
remove cover. No user-serviceable 
parts inside.

Name: Warning Label (1)
Type: 86-003-1011-0
Code No.: 100-236-230

WARNING

Keep heater away from equipment.

A heater can melt the equipment's power
cord, which can cause fire or electrical
shock.

Use the proper fuse.

Fuse rating is shown on the equipment.
Use of a wrong fuse can result in damage
to the equipment.

Содержание FCV-668







































Отзывы: