Furuno FCR-2139S-BB, Руководство по установке

Страница: 99 / 152

5-1
5. INPUT/OUTPUT DATA
5.1 Radar Processor Unit
Input and output data are shown in the table below.
Input
Output
5.2 Processor Unit
Input and output data are shown in the table below.
Input
*: Data input cycle should be more than 40 Hz (HSC) or 20 Hz (normal ship speed).
Data Specification Contents Remarks
Heading signal synchro or step GC-10 required
AD-10 format External AD-100
Data Specification Contents Remarks
Remote display signal HD, BP Trigger,
Video
2 ports
Data Specification Contents Remarks
Heading signal IEC61162-2*
Speed signal IEC 61162-1 Ed.4
Navaid data IEC 61162-1 Ed.4 Position, time and
date, datum, course,
speed, wind, current,
depth, temperature,
NAVTEX, etc.
AIS signal IEC 61162-2
Alarm handling
signal Contact closure Input from alarm system
IEC 61162-1 Ed.4 Input from alarm system
NOTICE
The radar(s) must be interconnected to the following type approved sensors :
Gyrocompass meeting the requirements of the IMO resolution A.424(XI).
EPFS meeting the requirements of the IMO resolution MSC.112(73).
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing
units having approved LAN ports.