Furuno FAR-3220Z, Руководство по установке

Страница: 16 / 28

3. SETTINGS AND ADJUSTMENTS
3-2
3.2 Settings from the PC(s)
Enter the following commands in a text file and use TeraTerm to send the file to the
EC-3000.
3.2.1 Antenna height
Antenna height cannot be set from the EC-3000. Set it with a command as follows.
3.2.2 TX channel (TX_CH)
3.3 Settings at Installation of the EC-3000
3.3.1 Initial pulse length settings for each range
Menu operation :
MENU

[1 ECHO]

[1 CUSTOMIZE ECHO]

[8 PULSE]
Set the pulse length for the ranges shown in the table below.
Menu operation for restoring default pulse lengths :
MENU

[1 ECHO]

[1 CUS-
TOMIZE ECHO]

[0 DEFAULT]
After restoring the pulse lengths, select [SAVE] to save the settings.
Antenna
height (m)
Command
Antenna
height (m)
Command
5 changeanth 0 0 60 changeanth 0 11
7.5 changeanth 0 1 70 changeanth 0 12
10 changeanth 0 2 80 changeanth 0 13
15 changeanth 0 3 90 changeanth 0 14
20 changeanth 0 4 100 changeanth 0 15
25 changeanth 0 5 110 changeanth 0 16
30 changeanth 0 6 120 changeanth 0 17
35 changeanth 0 7 130 changeanth 0 18
40 changeanth 0 8 140 changeanth 0 19
45 changeanth 0 9 150 changeanth 0 20
50 changeanth 0 10
TX CH Command
CH1 txchset 1
CH2 txchset 2
CH3 txchset 3
Range (nm) Pulse length setting
0.5 S1
0.75 S1
1.5 S1
3 S2
6 M1
12 M1
24 M2