Furuno FAR-3220W-BB, Руководство по установке

Страница: 19 / 185

1. INSTALLATION
1-5
1. Construct a suitable mounting platform referring to the outline drawing at the end
of this manual.
Note: The mounting platform must be flat, level and firmly secured.
• The diameter of the mast for fixing the antenna unit platform must be over 180
mm.
• The thickness of the antenna unit platform must be over 12 mm.
• The reinforcement rib must be installed diagonally.
2. Referring to the outline drawing, drill four mounting holes (

15 mm) in the mount-
ing platform.
3. Place the antenna unit on the platform, then orient the unit so the bow mark on its
base is facing the ship’s bow.
Note: When the antenna unit is placed on the platform, make sure that the plat-
form is not inclined.
4. Fasten the antenna unit to the mounting platform with four sets of M12

60 hex
bolts, nuts, flat washers, seal washers and spring washers. Insert the bolts from
the topside of the platform. The torque must be 49 N•m.
Note: DO NOT insert the bolts from the underside of the platform. The cover can-
not be opened.
Over 12 mm
Mounting platform
Be careful not to get
welding splatter on nuts,
bolts, etc. on the mounting
platform.
Diameter: Over 180 mm Diameter: Over 180 mm
Thickness: Over 12 mm Thickness: Over 12 mm
The reinforcement
ribs must be installed
diagonally.
Bottom of platform